Switching On/Off the equipment
This analyser is designed for use as a portable equipment and it does not require
any previous installation.
► Switching On:
Slide up for a while (approximately one second) the power slide switch
located on the left side of the equipment.
When all indicators light up at once release the switch, which returns to
its rest position.
The starting display picture appears and also a progress bar that
indicates the system load.
After the system load, the last screen before shutdown appears.
► Switching Off:
Slide up for a while (approximately one second) the power slide switch
located on the left side of the equipment.
When the screen goes off release the switch, which returns to its rest
position.
The starting display picture appears and the progress bar showing the
system shutdown progress.
► Reset:
Press the
key for 5 seconds. The equipment automatically turns off.
Use only in case of system crash.
In the PREFERENCES menu
(press 1s), APPEARANCE tab, option "Off" the
user can activate the automatic shutdown option, selecting a waiting time (time
without pressing any key) after which the equipment turns off automatically.
April 2013
2-9
To Next Page
Loading...
