6.2.3
Menu options for the LTE Ingress Test tool
On the bottom of the screen there are four menus accessible via the function
keys.
It displays channel/frequency and access the tuning
menu. It allows selecting the channel where apply
the LTE ingress test.
It displays the selected transmission standard menu
and accesses the signal parameters.
It displays the Tools menu.
It enables (ON) / disables (OFF) the LTE filter.
6.3
Echoes
6.3.1
Description
can detect echoes that can occur due to the simultaneous
reception of the same signal from several transmitters with different delays
large
objects, as buildings or mountains. This may be the explanation that having a
. Thus, the
installer can minimise the effect that the echo may cause on the installation,
This function is only available for DVB-T, DVB-T2 and DVB-C2. Therefore,
previously have to configure the equipment for the reception of such signals.
The Echoes function shows the response in time of a digital terrestrial channel
and therefore it
and amplitudes.
Another cause that may cause echoes is reflection of the signal on
good C/N and a good signal, the BER does not reach the minimum value.
With the Echoes function is possible to know the distance from where the
equipment is to the transmitter or the object that caused the echo
reorienting the antenna and reducing the effect of received echoes.
April 2013
6-61
To Next Page
Loading...
