Channel set
It displays a menu with the available channel sets to
select the channel set whose data want to be
displayed. Channel sets available are those that have
been selected during the creation of the datalogger.
Test Point
It contains four options:
Jump to: It allows selecting a test point.
Create New…: It creates a new test point.
Delete current: It deletes the current test point.
Delete all: It deletes all test points of the
datalogger.
Tab identifying the displayed test point.
6.8
Screenshot
6.8.1
Description
It captures the image that is appearing on screen at the moment of the
keystroke.
6.8.2
Operation
► Capture
Press the screenshot key for one second when on screen appears
the image to be captured. The LED next to key lights.
A progress bar shows the progress of the capture process. When
finished, the image is captured and the LED is OFF.
Then the virtual keyboard appears with the default name assigned to
the image.
Edit the name if necessary (see section 2.7.4). Then press : OK to
end the capture or
: Cancel for cancellation.
6-76
April 2013
To Next Page
Loading...
