Introduction
On the left side of the front panel there are three functions, which give direct
access to the three most important functions. One is the TV MODE key
which
displays the resulting image from decoding received RF signal.
TV MODE, thanks to the StealthID function of automatic identification,
automatically identifies and demodulates the TV signal received by the RF input,
so the user can check the signal on the screen. It shows information about the
channel and its services.
5.2
Operation
To access the TV MODE option, press the key.
The screen shows the tuned signal demodulated.
For digital carriers, the first service of the terrestrial multiplex or
satellite transponder appears. In case the signal is scrambled the
image will not appear and it shows the icon for scrambled signal.
In the case of an analogue signal, tuned signal will appear.
To access the next view (if digital signal) of the TV MODE, press the
again. At the last view it will return back to the first.
April 2013
5-47
To Next Page
Loading...
