Introduction
On the left side, the equipment has three function keys, which give direct access
to the three most important functions. One of them is the SPECTRUM
ANALYSER key
that displays the signal spectrum received through the RF
input connector.
ntify any anomalies and to measure the signal and display the
image tuned.
hen it detects the signal type, it locks it and
displays the information on screen.
The Spectrum Analyser mode allows checking the signals on the frequency band,
to visually ide
Thanks to the auto-identification or StealthID function, the system is constantly
identifying the signal it receives. W
4.2
Mode of operation
Connect the RF input signal to the equipment.
Select through the Tune Settings menu the frequency band (terrestrial
or satellite).
Access the SPECTRUM ANALYSER option by pressing the key.
Press again to display the next view.
4-34
April 2013
To Next Page
Loading...
