► Display
To display the captured image click on the Installations Management
key
.
Select the installation where the screenshot was done and press :
Manage.
Press : View. Select the “Screen Shots” option. This will limit the list
to only screenshots.
It appears a list of all the screenshots.
Move the joystick up or down to find the image file to be displayed.
Leave the cursor on the image file to be displayed. It appears a
progress bar that lasts a few seconds, depending on the image size.
Then the screen capture appears.
To delete or copy the image to a USB stick, select the image or images
by pressing the joystick, and then select the appropriate option from
the menu
: File.
6.9
Explore Channel Set
This option performs a scan of the selected channel set. It detects where active
signals are in a channel set and in which channels of the current channel set
signal is received. With this information it explores these channels with signal,
looking for any broadcast and identifying the TV system used in that channel.
When accessing the Explore Channel Set option appears the following screen:
Figure 48.
April 2013
6-77
To Next Page
Loading...
