Introduction
e
ENT (
On the panel left side, the equipment has three functions keys, which give direct
access to the thr e most important functions. One of them is the key
MEASUREM
) that measures the signal received through the RF input
connector.
odulates it in real time, automatically
detecting its characteristic parameters.
tomatically displayed
without introducing any additional parameter identification.
out characteristics of each signal type refer to Annex 1:
Signals description.
The user should connect a signal to the input and select the band, whether
terrestrial or satellite. Then the auto-identification function (also known as
StealthID) locks the signal and dem
Having identified the signal, the equipment measures according to the signal
type. All information about transponders or multiplex is au
Next there is a list of signals that the equipment can automatically detect. For
more information ab
Digital Terrestrial Television First Generation (DVB-T)
-T2
∗
) Digital Terrestrial Television Second Generation (DVB
Digital Satellite Television First Generation (DVB-S)
Digital Satellite Television Second Generation (DVB-S2)
Digital Cable Television First Generation (DVB-C )
∗∗
Digital Cable Television Second Generation (DVB-C2*)
Generic
2
Analogue terrestrial TV
Analogue Cable TV
Analogue Satellite TV
Analogue Terrestrial FM
∗
Only available for
∗∗
StealthID function for DVB-C only available for
2
Special digital signal. The equipment does not demodulate it but measures its power and C/N ratio. It
can be used for special signals as DAB/DAB + or COFDM modulation with narrow BW.
HD
RANGER
+
HD
RANGER
+
3-30
April 2013
To Next Page
Loading...
