2.7.4
Virtual Keyboard
When a user needs to enter or edit a file name (from an image, channel set,
etc.), a screen with a virtual keyboard appears as shown at the figure.
Figure 20.
To edit the file n e u er shoul
am s d follow these steps:
Using the joystick, place the cursor over the text box where the name
appears.
Press the joystick to enter in edit mode.
Move the cursor to place it next to the letter that user wants to edit.
Move the joystick on the virtual keyboard to edit.
ove the cursor to the right side of the letter and then press
the Delete key
To delete a letter, m
or (Del).
To enter an upper case letter press first
or the key. To block upper case
press
or the key twice consecutively. To return to lower case press or
the key again.
Keys with a point at the top right corner give access to special characters, by
keeping pressed the joystick for one second on the key.
After editing press
(Ok) to validate the name and continue the process or
(Cancel) to cancel.
2-20
April 2013
To Next Page
Loading...
