Press the key : Manage to access the data of the selected
installation.
Press : View to select the type of list to view (list of all the files,
only screenshots, only channel sets, only dataloggers or only DiSEqC
commands).
Select the files from the list to be copied on the USB memory stick, by
pressing the joystick or by pressing
: File and selecting “Mark All”
(it selects all files on the list displayed).
Once files are selected press : File and select the “Copy to USB”
option. This option is enabled only if it detects that there is an USB
connected to the equipment and if any file has been selected.
It shows a progress bar and a message informing that files are being
copied to the USB.
When finish you can remove the cable with the USB stick memory
directly from the equipment and connect it to a computer to view the
files copied.
appear with PNG extension and channel sets with XML
extension.
Default files are copied to the root directory of the USB memory.
Screenshots
Connecting a computer (host) to the (slave)
HD
RANGER/
+
8.1.2
and a
male
– USB male) supplied with the equipment.
This connection allows the communication between the equipment
computer via an USB cable or using the program NetUpdate4 of PROMAX.
NetUpdate4 program can be downloaded for free from the PROMAX website.
Connect the equipment to your computer using the cable CC-041 (mini USB
April 2013
8-87
To Next Page
Loading...
