Menu Options for the TV MODE
5.3.1
F1: Tuning
It displays the frequency or channel tuned.
It allows editing frequency or change channel in the active channel set
(see how to select a frequency or channel on chapter
4.5.1).
5.3.2
F2: Signal Parameters
It shows the parameters of the tuned signal.
It displays the menu to select the standard of the channel plan (see how to
select a standard on chapter
4.5.2).
5.3.3
F3: Service (digital signal)/Input (analogue signal)
► Digital Signal
It displays the list of services available in the multiplex tuned, with
information about the service type and the identification number.
Icons that appear next to the service name identify the features of the
service. The meaning is given in the following table:
Digital TV
service
High Definition
TV service
Digital radio
Data
Scrambled
service
► Analogue Signal
It allows selecting the type of analogue input, between antenna and
external.
To get an external analogue signal use the A/V input (see figure 5).
5.3.4
F4: Audio (digital signal)/Aspect Ratio (analogue signal)
► Digital Signal
It gives access to a list of available audio tracks in the selected service.
► Analogue Signal
It allows selecting the aspect ratio of the signal tuned (4:3; 16:9).
5-54
April 2013
To Next Page
Loading...
