There are the following options:
Load : It loads the selected installation. To select a installation
from the list, place the cursor on the installation and press
the joystick, then press “Load”
to load it. Once loaded,
the name of the installation appears on the upper left
corner of the screen, accompanied by the symbol
, that
means that is the current installation. All measurements,
screenshots, channel sets and other data will be stored in
the current installation.
Manage : It opens a window that displays all data of the current
installation and from where they can be edited, changed or
view (more details in section
7.3).
Create new : It creates a new installation with the data introduced by the
user (more details in section
7.4).
Tools : It shows up a menu with some tools to use with the
installations (see section
7.5).
7.3
Installation Management
Press on the option Manage
to access to the Installation manager screen:
Figure 51.
nel sets, DiSEqC programs, etc.
This installation can not be deleted or renamed.
The DEFAULT installation is the installation preinstalled on the equipment. It is
like any other installation and it can load chan
April 2013
7-81
To Next Page
Loading...
