The window is divided into three fields:
Installation data
It displays information about the installation using the following
fields:
► Name:
Name of the current installation file.
► Created:
The date the current installation was created.
► Size:
Size of the current installation.
► TER Channel Sets:
It shows the number of terrestrial channel sets in the
installation.
► SAT Channel Sets:
It displays the number of satellite channel sets in the
installation.
► Free Space:
It displays the amount of memory available.
List of files area
It shows all channel sets, screenshots, dataloggers and DiSEqC
commands available for the selected installation.
To move along this file list move the joystick up or down.
Any of these files can be selected or deselected by pressing the joystick.
Display area
It is the area where the file, on which the cursor is placed at the file list,
is displayed. The file is displayed only if the cursor is placed for a
moment.
In the case of displaying a channel set file, it shows the name, the band
and the DiSEqC commands.
For a screenshot, it displays a thumbnail of the full screen, as captured.
In the case of displaying a datalogger or a DiSEqC command, it only
shows the description of the file type.
7-82
April 2013
To Next Page
