Promax HD RANGER+ - Menu Options; Merogram; Description; Operation

6.4.3
Menu options
At the bottom of the screen there are three menus available via the function
keys.
It displays the channel/frequency where is pointing
the cursor and access the tuning menu.
It displays the selected transmission standard menu
and accesses the signal parameters.
It displays the Tools menu.
6.5
Merogram
6.5.1
Description
over time.
This function shows a graphical representation of the MER level for each carrier
of the locked signal, which is superimposed over time. During the Merogram,
maximum and minimum of some parameters and the time when they are
reached are stored. This tool is especially useful for detecting sporadic problems
6.5.2
Operation
DVB-C2.
The Merogram tool is available for signals with carriers: DVB-T, DVB-T2 and
Connect the RF input signal to the equipment.
Enter the MEASUREMENT or SPECTRUM mode.
Select the terrestrial b
channel or frequency.
and and tune a DVB-T, DVB-T2 or DVB-C2
Press the Tools key
.
Select the Merogram option.
It shows the Merogram of the signal.
To exit this function press any key of mode (TV mode, Spectrum mode
or Measurement mode). All data registered is cleaned after leaving.
6-66
April 2013