15
Vess A2200 Quick Installation Guide
Figure 17: Vess A2200 rear panel N+1 power connections
Important
For information about installing or hot swapping power
supplies, please see the product manual.
Important
The Vess A2200 is equipped with LED indicators on the
power supplies. Check these after powering the devices
on to make sure the cooling and power status for the
power module is normal.
PSU1, PSU2 and PSU3 are
installed on the Vess A2200.
Connect all power supplies to a
suitable power source.
PSU status LEDs
To Next Page
Loading...
Need help?
General