ProSoft Technology MVI56E-GSC - Writing the Clock Value to the Module

MVI56E-GSC/GSCXT ♦ CompactLogix or MicroLogix Platform Reference
Enhanced Generic ASCII Serial Communication Module User Manual
ProSoft Technology, Inc. Page 121 of 140
April 24, 2017
3 To check the status of the message, refer to the READCLOCKMSG tag.
4.6.7 Writing the Clock Value to the Module
1 Expand the MVI56GSCCLOCK controller tag.
2 Set the new Clock value in MVI56GSCCLOCK.CONFIG
3 Move a value of 1 to MVI56GSCCLOCK.WRITE
4 The bit will be automatically reset to 0.