ProSoft Technology MVI56E-GSC - Adding the Sample Ladder to an Existing Application

Reference MVI56E-GSC/GSCXT ♦ CompactLogix or MicroLogix Platform
User Manual Enhanced Generic ASCII Serial Communication Module
Page 128 of 140 ProSoft Technology, Inc.
April 24, 2017
4.8 Adding the Sample Ladder to an Existing Application
Important: The following steps describe how to install and configure the MVI56E-GSC module with
RSLogix 5000 version 15 or older. If you are using RSLogix 5000 version 16, please refer to
Sample Add-On Instruction Import Procedure.
1 Add the MVI56E-GSC module to the project. Right-click the mouse button on
the I/O CONFIGURATION option in the Controller Organization window to
display a pop-up menu. Select the NEW MODULE option from the I/O
Configuration menu.
2 Select 1756-MODULE.
3 Set the Module Properties values as follows:
Parameter
Value
Name
Enter a module identification string. Example: MVI56GSC.
Description
Enter a description for the module. Example: ProSoft
communication module for General Serial Communication.
Comm Format
Select DATA-SINT.
Slot
Enter the slot number in the rack where the MVI56-GSC
module is located.
Input Assembly Instance
1
Input Size
500
Output Assembly Instance
2
Output Size
496
Configuration Assembly Instance
4
Configuration Size
0