ProSoft Technology MVI56E-GSC - 2 MVI56 E-GSC Configuration

MVI56E-GSC/GSCXT ♦ CompactLogix or MicroLogix Platform MVI56E-GSC Configuration
Enhanced Generic ASCII Serial Communication Module User Manual
ProSoft Technology, Inc. Page 49 of 140
April 24, 2017
2 MVI56E-GSC Configuration
In This Chapter
 GSC.UTIL.BackplaneFail ...................................................................... 50
 GSC.CONFIG.PortX (where X = 1 or 2) ................................................ 51
 Changing parameters during operation ................................................. 56
All module configuration settings, data to be exchanged, status, and error data,
except for Debug Port Ethernet settings, are contained in the RSLogix 5000
controller tag arrays.
Only the following RSLogix controller tags need to be configured for the module
to work as needed for your application.
1 The GSC.UTIL.BACKPLANEFAIL controller tag sets up a backplane
communication failure counter to monitor the health of communication
between the module and the ControlLogix processor across the ControlLogix
backplane.