ProSoft Technology MVI56E-GSC - Page 140

Support, Service & Warranty MVI56E-GSC/GSCXT ♦ CompactLogix or MicroLogix Platform
User Manual Enhanced Generic ASCII Serial Communication Module
Page 140 of 140 ProSoft Technology, Inc.
April 24, 2017
M
Message timeout used • 83
Monitoring Backplane Information • 62
Monitoring Module Information • 61
MVI56E-GSC Configuration • 49, 90
MVI56E-GSC Module • 77
N
NIC Status • 62
Non-Scrolling LED Status Indicators • 70
Normal Data Transfer • 85
O
Opening the Sample Program in RSLogix • 122
Overview • 112
P
Package Contents • 13
Packet size limit used • 83
Pinouts • 73, 75, 130, 131, 132, 136
Port[x].Baudrate • 53
Port[x].DataBits • 54
Port[x].Enabled • 51
Port[x].Handshaking • 54
Port[x].Parity • 53
Port[x].RDelay • 55
Port[x].RPacketLen • 55
Port[x].RTermChar • 55
Port[x].RTermCnt • 54
Port[x].RTimeout • 55
Port[x].RTSOff • 54
Port[x].RTSOn • 54
Port[x].Spare • 56
Port[x].StopBits • 54
Port[x].Type • 52, 54, 55, 56
Port[x].WMinDelay • 56
Port[x].WPacketLen • 55
Port[x].WTermChar • 55
Port[x].WTermCnt • 55
Port[x].WTimeout • 56
Product Specifications • 73
R
Read Block • 86, 105
Reading Ethernet Settings from the Module • 117
Reading Status Data from the Module • 57
Reading the Clock Value from the Module • 120
Read-Only Devices • 79
Read-Write Devices • 80
Reference • 73
RS-232
Modem Connection (Hardware Handshaking
Required) • 133
Null Modem Connection (Hardware Handshaking)
• 133
Null Modem Connection (No Hardware
Handshaking) • 134
RS-232 Application Port(s) • 132
RS-422 • 135
RS-485 and RS-422 Tip • 135
RS-485 Application Port(s) • 135
S
Scrolling LED Status Indicators • 68
Select the Slot Number for the Module • 126
Setting Jumpers • 13
Setting Up a Permanent IP Address • 20, 22
Setting Up a Temporary IP Address • 18
Setting Up the Project • 16
Special Function Blocks • 90
Start Here • 9
Starting the Data Analyzer • 63
Stopping the Data Analyzer • 65
Support, Service & Warranty • 137
System Requirements • 11
T
Termination character(s) used • 82
Termination Mode Selection Chart • 84
Termination of Received Data • 81
Termination Type Field • 82
The Diagnostics Menu • 58
Troubleshooting • 71
U
User-Defined Data Types • 93, 101
Using CIPconnect® to Connect to the Module • 22, 24,
33, 60
Using ProSoft Configuration Builder Software • 15
Using RSWho to Connect to the Module • 22, 33
Using the Diagnostics Menu in ProSoft Configuration
Builder • 58
Using the Optional Add-On Instruction • 34, 112
Using the Sample Add-On Instruction • 92
Using the Sample Program - RSLogix 5000 Version 15
and earlier • 12, 34, 122
V
Version Menu • 61
W
What's Different? • 10
What's New? • 10
Write-Only Devices • 78
Writing the Clock Value to the Module • 121
Writing the Ethernet Settings to the Module • 119
Y
Your Feedback Please • 2