ProSun V3 - Technical Data - Electrical Specifications; Power, Rating, and Fuses; Operating Environment and Limits

26
MARK76V3002 Rev 3
Technical Data
Electrical Specications
ProSun V3 42 Xlc
Power consumption rating: 32 Amp
Electrical Rating 230V ~ 32A 60Hz
Rated Fuses: 40 amp 2-pole
Continuous Operation: Continuous operation for a maximum of
10 minutes.
Classication: Type B Applied Parts
Ingressprotectionclassication: IP20
Protection against electric shock: Class I ME Equipment
Noise level inside the device: 71 DBC
Noise level 1m away from the device: 62 DBC
Load on the base plate: Max 250lbs or 113 Kg
Equipment Weight: Approx 432 lb or 196 kg
Operating Humidity: 30-75%
Ambient Operating temperature: 50 to 86 degrees Farenheit
10 to 30 degress Celcius
Max. operating altitude (above sea level): <6500 ft (2000m)
Max surface temperature: 146.6 degrees Farenheit
63.7 degrees Celcius
Note: If operating this equipment
at altitudes above 6500 ft / 2000m
above sea level adaption may be
needed to get normal operation.