ProSun V3 - Operation of Equipment; Operator and Staff Responsibilities

35
MARK76V3002 Rev 3
Operation of Equipment
Obligations of the business operator
• As the business operator you are responsible for informing the user of the risks of tanning.
• All danger and safety labels should be attached to the equipment and clearly visible to the
user. You should not remove these labels at any time!
• No safety devices( i.e. temperature sensors) may be removed, deactivated or otherwise
bypassed from the equipment, as it can cause safety issues and impair the proper
functioning of the equipment.
• The equipment may only be used when in proper operating conditions.
• It is the business operators responsibility to ensure the tanning system is handled properly.
Sta󰀨 Training
As a business operator you are required to train your personnel by ensuring that they have
read and understood this user manual and all labeling on the equipment, and can properly
operate the equipment and instruct them in the established legal and accident prevention
regulations.Ensurethatyoursta󰀨isproperlytrainedandunderstandhowtousethe
equipment and that they observe all these instructions. This includes:
• Information regarding intended use and forseeable misuse of the equipment.
• Safety Instructions
• Operating Instructions
• Cleaning/Disinfection and maintenance instructions.
Please make sure the instructions and any additional information from the manufacturer, such
asmanuals,areavaialbletothesta󰀨attheirworkplace.
Regularlycheckthatyoursta󰀨isconsciousofthesafetyrulesandareawareoftherisksof
imporper use of this equipment.
Ensure that equipment is properly cleaned/disinfected per the intervals set forth in the
manual.
Ensurethatyoursta󰀨isprovidingtheuserswithproperadvice,inparticularregardingthe
exposure times, operation of the equipment and possible risks for misuse.