ProSun V3 - Commissioning of the Tanning Equipment

11
MARK76V3002 Rev 3
TheequipmentisinitiallycommissionedbyacertiedProSuntechnician.Thedevicewill
be properly assembled and handed over ready for us. In order to properly commission the
tanning equipment, the business owner must ensure that the location is ready prior to the
equipment being installed. This included having correct power requirements and having the
room in which the unit will be located ready.
The unit incorporates special preventive measures with regard to the electromagnetic
compatibility and must be installed and commissioned according to the EMC instructions
obtained from the assembly instructions.
Iftheequipmenthasnotbeenusedforalongerperiodoftime,thenitmustrst
beinspectedbyacertiedtechnicianbeforebeingputbackintooperationagain.
Commissioning of the tanning equipment