59
MARK76V3002 Rev 3
Assembly Introduction
Required for assembly (not included):
• Preferably 2 wrenches to tighten bolts and nuts
• Short ladder or step stool
• Power adapter kit (230V for commercial use, for warranty to apply voltage must be
between 215-230 V)
*Make sure you write the Serial Number (located on the Control Panel) down on the previous
page and store the manual somewhere you can easily access. The Serial Number is
MANDATORY to order parts for your unit, as well as, any customer service calls.
The boxes should be shipped in this manner.
To Next Page
Loading...
