28
MARK76V3002 Rev 3
Electrical Connections
DANGER!
WARNING!
Risk of electrical Shock
To avoid the risk of electrical shock, this equipment must only be connected to a
supply mains with protective earth.
Live Components
Risk of fatal injury due to electrical shock when touching live parts.
Both the power supply and the related connection work must comply with national standards.
Theconnectionworkandreplacementofthepowersupplycordmustbedonebyacertied
electrician or technician. The connection to the 3 pole 230V mains must be protected by
maximum over current protection. For Canada a Class-A ground fault circuit (GFCI) has to
be used. Any equipment outside of the US and Canada needs to comply to their countries
standards.
Connection Requirements
Theremustbeanemergencydisconnecttoturnotheunitintheroom.
To Next Page
Loading...
