ProSun V3 - Tanning Bed Standards

29
MARK76V3002 Rev 3
FILL IN STANDARDS INFORMATION HERE
Tanning Bed Standards
Guidance and Manufacturer’s Declaration - Electromagnetic Emissions
TheProSunV3Model42V3isintendedforuseintheelectromagneticenvironmentspecied
below. The customer or the user of the ProSun V3 Model 42V3 should assure that it is used
in such an environment
Emmission tests Compliance Electromagnetic environment - Guidance
RF emissions
according to CISPR 11
Group 1 The ProSun V3 Model 42V3 uses RF energy only for
its internal function. Therefore, its RF emissions are
very low and are not likely to cause any interference in
nearby electronic equipment.
RF emissions
according to CISPR 11
Class A The ProSun V3 Model 42V3 is suitable for use in all
establishments excluding domestic establishments
and those directly connected to the public low voltage
power supply network that supplies buildings used for
domestic purposes.
Harmonic emissions IEC
61000-3-2
Not Applicable
VoltageuctuationsIEC
61000-3-3
Not Applicable
This tanning equipment is in conformity with performance standards 21 CFR 1040.20 and the
standards for electromagnetic compatibility (EMC):
IEC 60601-1-2 (2014)