93-331-73 Issue 2 Page 16 of 32 © Protec Fire Detection PLC 2013
Access Level 3 (Engineer Controls)
Only engineers are permitted access to level 3 functions, these are:
• All level 2 functions, plus
• The programming of coincidence zones.
• The programming of non-latching zones.
• The programming of the detector circuit end of line type (capacitive or resistive).
11.2 Zone Programming Choices
Each zone of the 3200 may be programmed in the following manner.
• Non-latching mode.
• Coincidence mode.
• Test mode.
Please not that a zone can only be programmed with one of the choices (ie. a zone cannot be set-up
as non-latching and coincidence) non-latching mode overrides coincidence mode.
Test mode overrides all other programming.
www.acornfiresecurity.com
www.acornfiresecurity.com
To Next Page
Loading...
