1.4 Before programming, place the “System” switch in the appropriate heating or
cooling mode for the desired program you wish to set. Do not attempt to
program the thermostat with the “System” switch in the “Off” position.
1.5 When the “System” switch is in the heating or cooling position, the
appropriate “HEAT” or “COOL” icon will appear in the display if the system
is running.
1.6 When the “System” switch is in the “Off” position, the “OFF” icon will
appear in the display.
1.7 To reset all the set point times, temperatures, and other user settings to default,
press the “Reset” button using a paper clip or other small pointed object.
2) Program Groups
You can choose from one of three program groups to program the set point times
and temperatures, or program each day individually depending on your schedule
needs. The program groups can be used to set the main portion of your
programming schedule, allowing you to modify individual days depending on
your requirements.
To Next Page
Loading...