Proteus DOLPHIN V4 - Distance Display and Setting; Calorie Display and Setting

D. DISTANCE :
Shows the distance with counting up or down. Press the ENTER button to enter setting mode,
press UP or DOWN button to set the desired distance. The range of setting value is from 1.0 to
999 KM or Mile.
After finish setting the value, it starts countdown. While counting down to 0.0, the monitor will beep
12 times and count up from 0.0. If without setting value, the distance will count up and the
maximum value is 999 KM or Mile.
x 2
DO
WN
UP
+
-
O
M /
R
E
D
T
E
N
E
~
x 3
DOWN
UP
+
-
O
M /
R
E
D
T
E
N
E
~
E. CALORIE :
Shows the calories. Press the ENTER button to the setting mode, then press UP or DOWN button
to set the desired calorie to be burned. The range of value is from 1.0 Kcal to 999 Kcal.
After finish setting the value, starts countdown. While counting down to 0.0, the monitor will beep 12
times and count up from 0.0. Without setting value, the calorie will count up and maximum value is
999.9 Kcal.
NOTE : This data is a rough guide, which can not be used for medical reference.
22