Do you have a question about the PS Engineering PMA8000G and is the answer not in the manual?
Type | Audio Panel |
---|---|
Manufacturer | PS Engineering |
Microphone Inputs | 4 |
Bluetooth | Yes |
Stereo | Yes |
IntelliVox Intercom | Yes |
Split Mode | Yes |
ILS Marker Beacon Receiver | Yes |
Music Input | Yes |
FAA TSO Compliance | Yes |
Channels | 4 |
Input Impedance | 600 ohms |
Power Supply | 14-28 VDC |
Frequency Response | 300 Hz to 3 kHz |
Output Impedance | 150 ohms |
Weight | 2.2 lbs (1 kg) |
Number of Positions | 6 Com positions, plus AUX and TEL |
Details the PMA8000G's core features: audio selector, intercom, marker beacon, Bluetooth, flightmate.
Outlines FAA TSO approvals and operational conditions for the device.
Lists technical specifications including TSO compliance, environmental, and power requirements.
General guidance on cable harness wiring, MIL-SPEC, and noise prevention.
Discusses potential electrical noise and mitigation strategies for the PMA8000G.
Covers factory adjustments and controls on the top cover.
Lists the function of each pin on J1 and J2 connectors.
Steps for verifying wiring after installation.
Final steps for installing the unit into the mounting rack.
Procedures for verifying the system after installation.
Lists necessary test equipment for checkout.
Detailed steps for testing the audio panel functions.
Procedures for testing the marker beacon functionality.
Steps to verify Bluetooth connectivity.
Testing the internal recorder playback feature.
Details intercom system operation and features.
Explains the different intercom modes (ISO, ALL, CREW).
Controls for music inputs and muting features.
Options for distributing music to various stations.
How to use the PMA8000G for Bluetooth telephone calls.
Overview of the flightmate audio storage system.
Steps for pairing and un-pairing Bluetooth devices.
Steps to pair the PMA8000G with the PS Streamer.
Conditions for factory warranty validity and coverage details.
Procedures for obtaining factory service and support.