If you scroll through all function numbers without making a selection, the display will read
"Setup Done?". To scroll through the functions again, press "*" for NO, or if you are
finished, press "#" for YES.
Programming a New Installation
In order to program a new installation, you must perform the following steps:
(1) Set the correct time and date (Function #1)
(2) Set the property business hours (Function #2)
(3) Set the building sizes for the property (Function #4)
(4) Add new units as required (Function #5)
Optional programming steps that may be necessary after completing the above steps are
as follows:
(1) Set holidays that are to be recognized (Function #3)
(2) Mark any units that need 24 Hour access (Function #9)
(3) Suspend access for any overdue customers (Function #6)
Programming details for each function number are given in the sections of the manual that
follow.
To Next Page
Loading...