PTI Falcon - Function #3 - Set Holidays?

29
Function #3 - Set Holidays allows up to thirty two holidays to be specified in advance by
date. On these days, the PTI Falcon will use the holiday access hours rather than the
normal weekday, Saturday, or Sunday access hours. Each holiday is assigned a
consecutive holiday number in the range of one to thirty two. The holidays do not have to be
assigned in any particular order.
For example, to set holiday number three to be July 4, 1991,
enter
3
for the holiday number as shown.
Then, enter
07
/
04
/
91
for the holiday date as indicated. On
July 4, 1991 the programmed holiday hours will be observed
by the PTI Falcon.
If you need to change a holiday, follow the same procedure and simply enter a new date for
the holiday. The PTI Falcon display will always indicate the present setting for the holiday
date on the top line of the display. Holidays which have never been programmed will
appear as
00/00/00
. It is not necessary to remove a holiday which has already passed,
because the date will never occur again anyway. If you wish to cancel a holiday that has not
yet occurred, you may reset the holiday date to 00/00/00 or to any date which has already
passed. Remember that the two digit year for any date in the PTI Falcon refers to the
twentieth century if the year is eighty five or higher, and the twenty first century for years
zero through eighty four.
Function #3 -
Set Holidays?
Holiday # =
3
Holiday 00/00/00
Date:
07
/
04
/
91