EasyManuals Logo

Pulsar Krypton 2 XG50 User Manual

Pulsar Krypton 2 XG50
63 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Battery Pack
Quick-change IPS7 Li-ion battery pack
Charging via USB Type-C port
Power supply
Precautions
Always use the IPS charger supplied with the device (or purchased
separately) to charge IPS batteries. Using an unsuitable charger can cause
irreparable damage to the battery and fire.
Do not charge the battery immediately after bringing it from cold to warm. Wait
at least 30 minutes for the battery to warm up.
Do not leave the battery unattended while charging.
Do not use the charger if it has been modified or damaged.
Do not leave the battery in a charger connected to the network after charging
is complete.
Do not expose the battery to high temperatures and naked flame.
Do not use the battery as a power source for devices that do not support IPS7
batteries.
Do not disassemble or deform the battery.
Do not drop or strike the battery.
Do not submerge the battery.
Keep the battery out of the reach of children.
Attention! Please do not use the IPS 14 Battery Pack with the Krypton 2
FXQ35/FXG50 due to the battery´s heavy weight.
Recommendations for Battery Use
The battery should be partially charged for long-term storage 50 to 80 %.
The battery should be charged at an ambient temperature of 0 °C…+35 °C
(+32 °F…+95° F). Otherwise, lifespan of the battery will decrease significantly.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pulsar Krypton 2 XG50 and is the answer not in the manual?

Pulsar Krypton 2 XG50 Specifications

General IconGeneral
BrandPulsar
ModelKrypton 2 XG50
CategoryMonocular
LanguageEnglish

Related product manuals