26. February 2024 © Copyright 2024, PROCEQ SA 60
You can also delete any particular cell, or the whole scan.
Figure 72: Deleting information.
.
It is always possible to resume a measurement. Even if the file has been closed. To do so, you
will need to press the “play” button.
Figure 73: Resuming files.
Once the measurement is finished, you will be able to see the whole grid scan heatmap. It is
also possible to see each individual B-scan by swiping two fingers down on the main screen.
In this way, you can manually adjust the automatic backwall detection in case the AI has made
a mistake.
To Next Page
Loading...