USR-W630s User Manual
Disable: Disable the network switching function and use the
current Internet access method to access the Internet.
Custom: Determine network status based on custom
reference address,
Gateway: Refer to the gateway to determine network status
IP/domain name can be set
IP/domain name can be set
IP/domain name can be set
Link detection interval: configurable, range: 1-600s
Ping packet size: configurable, range: 0-1024 bytes
Ping timeout: configurable, range: 100-20000ms
Illustrate:
Configure network priority detection rules, enabled by default, default network switching order: wired
network first;
Set up 3 groups of IP addresses (you can also set domain names) for detecting the networking status, and
perform ping packets in sequence. If the ping is successful, it will be judged that the network is normal
and no further operations will be performed;
If none of the three sets of detection rules can be pinged, perform network switching and continue ping
packet detection;
If neither the wired network nor the wireless network can be pinged, it is judged that the wireless client
cannot connect to the external network.
4.4. Wireless AP
W630s supports 2.4G and 5.8G dual-band WIFI, supports modification configuration of SSID, password,
channel, etc.;
Dual-band WIFI APs can be turned on at the same time, or one of the APs can be turned off;
Can support 8 clients connecting at the same time;
Supports MU-MIMO and OFDMA technology, supports communication with 8 clients at the same time.
4.4.1. Wi-Fi settings of 2.4 & 5.8G
Users can set Wi-Fi related information on this page.
To Next Page