USR-W630s User Manual
NO AUTH: No certificate verification is required.
Server: Only the server certificate is verified.
BOTH: Both client and server certificates need to be validated.
5.2.7. Heartbeat / Registration package
5.2.7.1. Registration Packet Description
Registration Packet: It is used to enable the server to identify the source device of the data or as a password
to obtain server function authorization. The registration packet can be sent when the device establishes a
connection with the server or can be spliced at the beginning of each data packet as part of a data packet. The
data in the registration packet can be MAC or custom registration data. Explanation:
Selecting MAC means using the WAN port MAC address as the content of the registration packet.
This function is only available when the link is set to tcpc or udpc mode.
5.2.7.2. Network Heartbeat Packet Description
Network Heartbeat Packet: It is sent to the network end, primarily to inform the server of the online status of
terminal W630s, in order to maintain a long connection with the server. Explanation:
This function is only available when the link is set to tcpc or udpc mode.
5.3. Advanced settings
Network AT, serial heartbeat packets, and no data operation can be configured.
To Next Page