PUSR USR-W630s - Page 25

USR-W630s User Manual
pusr.com
- 25 -
Figure 30. TCP server parameters settings page
Table 8. Detail parameters of TCP server
Items
Description
Default
Enable
Whether this link is enabled, ON (enabled)/OFF (disabled ).
ON
Name
Set the name of this link.
TCPS_X
Description
Set the remark information of this link.
TCPS_X
Local Port
Port of W630s.
0
Maximum Sockets
Supported
Range:1~16
8
Exceeding
Maximum
Kick: Kick the older client connection.
Keep: Keep the older client connection.
KICK
Transmission Mode
Pass- Through: transparent transmission mode,
Modbus RTU: Modbus RTU and Modbus TCP transfer.
Pass- Through
Host Polling
ON: Multiple host polling mode.
OFF: Modbus RTU/TCP protocol conversion mode.
OFF
Polling Timeout
Unit: ms
Range: 10-6000 ms
200
Modbus Timeout
Response
ON: Enable Modbus Timeout Response.
OFF: Disable Modbus Timeout Response.
OFF
Bind
COM1-485: Data is transmitted by RS485 only.
COM2-232: Data is transmitted by RS485 only.
COM1+COM2：Data is transmitted by RS485 and RS232 both.
COM1-485
Offline Data Cache
ON: Offline data will be cached and sent when get online
again.
OFF: Offline data will be not cached.
OFF
Data Overflow
Discard old Data: Store the latest data.
Discard old Data