Pyronix ATLAS 8 PLUS User Manual

3 ACCESS LEVELS
3.1 User Codes (Codes 3 to 7) 1. Panel setting and unsetting with a unique pass code.
2. Setting and unsetting of the door chime facility.
3. Event log viewing.
3.2 Master & Manager Codes All User facilities plus
(Master Code 1, Manager Code 2) 4. Clearing of event log (if allowed by the Engineer).
5. Changing the User codes, (the Manager cannot alter the Master
User Code).
6. LED / Strobe / Bell / Extension Speaker test facility.
7. Walk test facility for all four set modes.
8. Remote Dial in enabling.
3.3 Engineer All facilities except setting / unsetting the system unless user code known.
9. Zone programming for all four set modes.
10. Bell timer setting.
11. Entry / Exit timer settings.
12. Alteration of Engineer code.
13. Enabling or Disabling of Event log reset by Master user.
14. Programming of communication and programmable output
options.
15. Engineer NVM Reset.
Page 10

Pyronix ATLAS 8 PLUS Specifications

General

Brand	Pyronix
Model	ATLAS 8 PLUS
Category	Keypad
Language	English