Pyronix ATLAS 8 PLUS - Alarm Receiving Centre Second Telephone Number; Downloading Access Code; Zone Alarm Reporting Codes

Enter followed by the number of re-sets required to ( = continuous re-setting)
11.11.8 Alarm Receiving Centre Telephone Number
Enter
followed by the telephone number. (Up to 16 digits)
By pressing the
a " " is displayed to cause a 2 second pause during dial out.
Press
to store entry.
A number consisting of 16 digits will be stored automatically when the last digit is entered.
11.11.9 Alarm Receiving Centre Second Telephone Number
Enter
followed by the telephone number. (Up to 16 digits)
By pressing the
a " " is displayed to cause a 2 second pause during dial out.
Press
to store entry.
A number consisting of 16 digits will be stored automatically when the last digit is entered.
11.11.10 Customer Account Code (Issued by Central Monitoring Station)
Enter
followed by the 4 digit code.
To use hex codes, use the up key to select the character required and the
key to accept.
11.11.11 Downloading Access Code
Enter
followed by the 4 digit code.
11.11.12 Zone Alarm reporting Codes
Enter
followed by 2 digits for each alarm zone. To disable an event insert blanks in place of the two digits.
To use hex codes, use the up key to select the character required and the
key to accept.
Example
Alarm zone 1
Alarm zone 2
Alarm zone 3
Alarm zone 4
Alarm zone 5
Alarm zone 6
Alarm zone 7
Alarm zone 8
For example to program alarm zone reporting codes 68 69 and 71 to zones 2, 4 and 7 respectively the following would be
entered:
Zone 1 Zone 2 Zone 3 Zone 4 Zone 5 Zone 6 Zone 7
Reporting codes are automatically stored after the 16th key press or key to accept.
Rins163 Issue 9 Page 35