Pyronix ATLAS 8 PLUS - Communicator Test; Miscellaneous Reporting Codes

12.11.31 Communicator Test
Enter
press the following keys to toggle through the following communication outputs.
NOTE: If the reporting format option is set to BSIA fast format, the following event tests will be sent to the alarm receiving
centre as events.
- Alarm
- P.A.
- Fire
- Confirmed alarm
- Abort
- Open / Close
Press the
key to exit.
11.11.32 Miscellaneous Reporting Codes
Enter
Enter two digits for the two reporting codes.
Examples On board comms line fail
Off board stu line fail
12.11.33 System Option 11 Day Mode Send Options
Enter
followed by - . The RKP will toggle  and X as the numbered keys are pressed.
Key Press
Display 1 2 3 4

Alarm On P.A. On Fire On Confirmed Alarm On
X
Alarm Off P.A. Off Fire Off Confirmed Alarm Off
Enter to accept.
12.11.34 System Option 12 Day Mode Send Options cont.
Enter
followed by - . The RKP will toggle  and X as the numbered keys are pressed.
Key Press
Display 1 2 3 4

Abort On Set / Unset On System Fault On Spare
X
Abort Off Set / Unset Off System Fault Off Spare
Enter to accept.
12.11.35 System Option 13 Set A Send Options
Enter
followed by - . The RKP will toggle  and X as the numbered keys are pressed.
Key Press
Display 1 2 3 4

Alarm On P.A. On Fire On Confirmed Alarm On
X
Alarm Off P.A. Off Fire Off Confirmed Alarm Off
Enter to accept.
Page 56