Pyronix ATLAS 8 PLUS - System Set; Unset Reporting Codes; User Set Reporting Codes

12.11.13 Zone Tamper Alarm Reporting Codes
Enter Enter 2 digits for each tamper zone. To disable an event insert blanks for both digits.
To use hex codes, use the up key to select the character required and the
key to accept.
Example
Tamper zone 1
Tamper zone 2
Tamper zone 3
Tamper zone 4
Tamper zone 5
Tamper zone 6
Tamper zone 7
Tamper zone 8
Reporting codes are automatically stored after the 16th key press or by pressing the key.
12.11.14 System Set / Unset Reporting Codes
Enter
Enter 2 digits for seven reporting codes. To disable an event insert blanks for both digits.
To use hex codes, use the up key to select the character required and the
key to accept.
Example
Set A
Set B
Set C
Set C
Duress Set
Duress Unset
Confirmed Alarm Code
Reporting codes are automatically stored after the 14th key press or by pressing the
key.
12.11.15 User set reporting codes
Enter
Enter 2 digits for seven reporting codes. To disable an event insert blanks for both digits.
To use hex codes, use the up key to select the character required and the
key to accept.
Example
Set User 1
Set User 2
Set User 3
Set User 4
Set User 5
Set User 6
Set User 7/Keyswitch
Reporting codes are automatically stored after the 14th key press or by pressing the key.
Page 52