EURO 46, 162 & 280 Programming Manual
Page: 13
Wireless Device Control Programming: Learning Bells
1. Press or to scroll to 'WIRELESS DEVICE CONTROL'. Press
.
2. 'Control Inputs' will be displayed. Press .
3. 'Control Bells' will be displayed. Press .
4. 'Learn Devices' will be displayed. Press .
5. Press or to select the bell (1 or 2) to learn and press .
6. Open the EURO control panel wireless Deltabell and press and hold
the 'LEARN' button until all LEDs flash
NOTE: Once the GREEN LED is flashing, the learn process has been
successful. Repeat the process above if the learn procedure has not
been successful.
Wireless Device Control Programming: Deleting Bells
1. Press or to scroll to 'WIRELESS DEVICE CONTROL'. Press
.
2. 'Control Inputs' will be displayed. Press .
3. 'Control Bells' will be displayed. Press .
4. 'Learn Devices' will be displayed. Press .
5. 'Delete Devices' will be displayed. Press .
6. 'Delete All' will be displayed, press and enter '2000' to delete
both wireless Deltabell external sounders, or press to delete
individual external sounders.
7. The external sounders that are learnt will be displayed, press
or to select the bell and press to delete it.
8. 'Bell Deleted' will be displayed.
LEARN
>5s
WIRELESS DEVICE
CONTROL?
Control Inputs?
Control Bells?
Learn Devices?
Select Bell
Available [1]
Learning...
Bell Learnt!
WIRELESS DEVICE
CONTROL?
Control Inputs?
Control Bells?
Learn Devices?
Delete Devices?
Delete All?
Select Bell
Learnt [1]
To Next Page
Loading...
