EasyManuals Logo

Pyronix Castle EURO 46 Series User Manual

Pyronix Castle EURO 46 Series
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
EURO 46, 162 & 280 Programming Manual
Page: 8
3.4.2 The Internal Tag Reader (EUR-107)
The Internal tag reader can be used for setting/unsetting, entry control or access control. Refer
to the installation manual (RINS1529) for connection details.
Tag Area (Where a valid tag must
be presented to set/unset)
Alert LED
Alarm LED
Tamper LED
Fault LED
Unset LED
3.4.3 The External Tag Reader (EUR-108)
The Internal tag reader can be used for setting/unsetting, entry control or access control. Refer
to the installation manual (RINS1529) for connection details.
To set/unset the system using the External Tag Reader,
present a pre-programmed tag to the centre of the prox.
The prox will display the system status: Green = Unset.
Red = Set. Present the tag again within 10 seconds and
the system will set or unset.
The system will then set depending on the type of exit
mode programmed (Final door, Timed or Push to set)
3.5 Text Programming
Text may be programmed for input names, for the ‘sign-on’
message, and to identify the Set Level being set / unset. Each key is
allocated alpha-numeric and punctuation mark characters.
The EURO control panel incorporates predictive text, so the system
will predict the word that is being spelt. For example, if ‘B’ is
pressed, and then and ‘e’ is pressed, Bedroom will be displayed,
to accept this press . If the word that is required doesn’t appear
on the LCD display, type the word as normal.
To type a word, press the relevant key the appropriate number of
times – e.g. for the letter ‘k’ press twice, or for the letter ‘s’
press four times. For punctuation marks, press the key.
In addition, the keys are used as follows:
= make the character into a capital = move cursor left = clears cursor / adds a space
= moves cursor right
3.6 Grade 2 and Grade 3 Defaults
The security grade of the EURO control panel can either Grade 2 or Grade 3
*.
In the 'CLEAN START' function (Page: 38), enter '2002' for Grade 2 defaults, or '2000' for Grade 3
*
defaults.
*
The EURO 46 Small control panel will only conform to Grade 2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pyronix Castle EURO 46 Series and is the answer not in the manual?

Pyronix Castle EURO 46 Series Specifications

General IconGeneral
BrandPyronix
ModelCastle EURO 46 Series
CategoryControl Panel
LanguageEnglish

Related product manuals