OPERATE USER
OUTPUTS?
Select Output
[01]
Output Off
Operate User Outputs
Omit Inputs
Edit Users (Adding New Users)
Use b or h to scroll to ‘OPERATE
USER OUTPUTS’. Press f.
Select the output to be operated by using the b
and d keys and press f.
PLEASE NOTE: The output to be operated can also
be entered using the numerical keys.
Press f trigger output on and off.
Press h to exit.
Repeat if necessary.
Press b or h to scroll to ‘OMIT INPUTS’. Press
f.
Enter the inputs you require to be omitted for the
next setting procedure. Press f.
PLEASE NOTE: All inputs will be only omitted for the
next setting procedure.
OMIT INPUTS?
EDIT USERS?
Omit Day Al [01]
Add New User?
The ‘EDIT USERS’ function allows adding, editing and deleting of user codes, tags and key fobs. The
Master Manager Code can also be changed. The control panel can have up to 75 users.
PLEASE NOTE: Any proximity tags that are to be used on a standalone tag reader must have
flexi-set set to ‘No’.
Press b or h to scroll to ‘EDIT USERS?’. Press
f.
To add a new code or tag press f.
Press h to delete or change a user code (see the
next section for details).
To Next Page
Loading...
Need help?
General
