Using the HomeControl+ App
Adding a Panel to the App
Open the HomeControl+
App, the below screen will be
displayed.
Enter the System ID (as shown
in the ‘SET UP APP DATA’).
Enter a system name (this is just
for your reference, e.g. Home,
Work, Office etc.)
If this system has a SIM card
and you want to allow the
HomeControl+ App to send
SMS to it, enter the details of
the SIM.
Press ‘Done’.
Connecting to a Panel
Select the system that you wish
to connect to.
Enter a valid user code and
the ‘App Password’ then press
’Log In’.
If the user code, or ‘App
Password’ is wrong, the below
will be shown and you will need
to re-enter the information.