Generate App
Password Key?
Send Password
Key in a text
Security Level
High [1]
View App
Password Key?
Key Part 1 A1B2
C3D4 E5F6 G7H8
Alwys Poll Cloud
No [0]
HIGH SECURITY LEVEL
Press 1 to select ‘High’. Press f.
Press f to generate a high security password.
Please take note of the key (part 1 is shown, press f
for part 2).
Press f to view the password again. Press h to
move to the next menu option.
Rather than inputting the 32 character high security
password into the App, you can send the password to a
mobile phone and copy and paste it from the text.
Press f to enter a mobile phone number*.
Press b or d to enable or disable the polling to the
cloud at all times. Press f.
*PLEASE NOTE: This function only available when using 3rd Party SIM cards only.
The password key is sent to your mobile phone as SMS message. UK numbers can be entered
with or without an international dialling code (e.g. +44).
If you need to enter an international dialling code to send the key to a foreign SIM card, use the
a key to enter the ‘+’ symbol.
Module Set Up
The type of module installed in your alarm system will determine which menu is shown here. This
menu is used to program the module so that it can send and receive data whether that be via router
or mobile data.
The connection of the module would typically be set up by the engineer on installation and if that has
been done it is not recommended that the existing programming in this menu be changed.
Please refer to the ‘Communications Guide’ for more details on this menu.
To Next Page
Loading...
Need help?
General
