Use App
Yes [1]
App Password
_
SET UP APP
DATA?
Security Level
Normal [0]
System ID
AAABBBCC
Alwys Poll Cloud
No [0]
Cloud Password
_
Set up App Data
Follow the information below to connect the alarm system to the Pyronix Cloud.
PLEASE NOTE: This menu will only be visible with a HomeControl+ compatible module installed.
Press b or h to scroll to ‘SET UP APP DATA’. Press
f.
Press b or d to enable or disable using the
HomeControl+ App. Press f.
Please take note of the ‘System ID’. This will be needed
for the HomeControl+ App set up. Press f.
Create a cloud password. This is the password used
when adding this panel to a Pyronix Cloud account.
Press f.
NORMAL SECURITY LEVEL
Press 0 to select ‘Normal’. Press f.
Create an App Password. This must be entered when
using the HomeControl+App in order to connect to the
system. Press f.
PLEASE NOTE: This is compulsory.
Press b or d to enable or disable the polling to the
cloud at all times. Press f.
PLEASE NOTE: ‘Yes’ is recommended.
To Next Page
Loading...
Need help?
General
