Q-See QT SERIES Manual

12
ATTENTION: Do not log in. You will
create a password later.
Step 6: Download the
QT View Mobile App
Before starting the NVR, download our free
QT View mobile app to your mobile device.
Step 7: Powering up the NVR
A. Plug the NVR power supply cord into the
DC+48V Port on the back of the NVR.
B. Plug the power supply or power adapter
into a surge protector.
C. Turn on the NVR’s power switch (if present).
The NVR will beep as it powers up, and the
Startup Wizard will appear on-screen after
a few minutes.

Q-See QT SERIES Specifications

General

Series	QT Series
Video Compression	H.264
Remote Viewing	Yes
HDMI Output	Yes
VGA Output	Yes
Motion Detection	Yes
Channels	4, 8, 16
Recording Resolution	1080p, 720p
Hard Drive Capacity	Up to 6TB
Mobile App Support	Yes
Network Connectivity	Ethernet