Q-See QT SERIES Manual

6
BACKUP PLAYNET
REC
HDD
REC
Menu/+
Backup/-
/ESC
Enter
Search
Understanding Your NVR: Front Panel
REC:
Manually
begins
recording
LED Indicators: Show status
of power, HDD, record, etc.
Direction:
Navigate through
on-screen options
Menu/+ : Increase the
value in SETUP. Enter
menu in LIVE VIEW
USB Port: Connect USB
flash or external hard
drives to update firmware
or backup recordings
Enter:
Confirm
selection
Backup/- : Decrease
the value in SETUP.
Enter backup mode in
LIVE VIEW
Search:
Enters
Search
Mode
Multiscreen:
Change screen
display mode between
number of channels
1 4 9 16
: Launches PLAYBACK window.
Starts or pauses video
: Fast Forward
: Rewind
/ESC : Quit PLAYBACK mode. Exit
the current window or status. Switch
video output mode.
(Press and hold 10 seconds)
NOTE: Your NVR model may differ from that shown in this illustration.

Q-See QT SERIES Specifications

General

Series	QT Series
Video Compression	H.264
Remote Viewing	Yes
HDMI Output	Yes
VGA Output	Yes
Motion Detection	Yes
Channels	4, 8, 16
Recording Resolution	1080p, 720p
Hard Drive Capacity	Up to 6TB
Mobile App Support	Yes
Network Connectivity	Ethernet