QNAP TL-R1200C-RP User Manual

3. Hardware Installation
This section provides information on installing drives, memory modules, and expansion cards.
Drive Installation
QNAP JBOD enclosures are compatible with 3.5-inch hard drives, 2.5-inch hard drives, and 2.5-inch solid-
state drives.
Installing 3.5-inch Drives on 3.5-inch Trays
Warning
• Installing a drive deletes all data on the drive.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
•
Moving fan blades: Keep your hands and other body parts away from moving fan
blades.
•
Other moving components: Keep your hands and other body parts away from other
moving components.
1. Power off the JBOD enclosure.
2. Remove a drive tray.
a. Pull the handle to release the tray.
b. Pull the tray out.
TL-R1200C-RP User Guide
Hardware Installation 10

QNAP TL-R1200C-RP Specifications

General

Storage drive size	2.5/3.5 \
Total installed storage capacity	0 TB
Number of storage drives supported	12
Supported storage drive interfaces	Serial ATA III
USB version	3.2 Gen 2 (3.1 Gen 2)
USB connectivity	Yes
USB connector type	USB Type-C
USB ports quantity	1
USB connector gender	Female
Fan diameter	70 mm
Product type	HDD/SSD enclosure
Product color	Black, Grey
Rack capacity	2U
LED indicators	Fan fail, HDD, Link, Status
Number of fans	2 fan(s)
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Power source type	AC
AC adapter frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Noise level	33.4 dB
Data transfer rate	6 Gbit/s
Cables included	AC, USB Type-C to USB Type-A
Harmonized System (HS) code	84733080

Weight and Dimensions

Depth	562.5 mm
Width	482 mm
Height	88.6 mm
Weight	11030 g
Package weight	14290 g