2. Product Overview
This chapter provides basic information about the QNAP JBOD Expansion Unit JBOD enclosure.
About the TL-R1200C-RP
QNAP JBOD enclosures are designed to increase the capacity and utility of your NAS or computer and
provide a wide range of storage applications. Drives installed in the JBOD enclosure can be managed
independently or be configured as software RAID by the host device. The TL-R1200C-RP features a USB
3.1 Gen 2 Type-C port to ensure quick and efficient data transfer between the JBOD enclosure and the host
device. The TL-R1200C-RP is compatible with devices running on Windows®, Mac®, or Linux® operating
systems.
Hardware Specifications
Warning
• If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third party
invalidates the warranty.
• QNAP is not responsible for any damage or data loss caused by unauthorized
modifications and installation of unsupported third-party applications.
For details, see the QNAP Warranty Terms and Conditions.
Component TL-R1200C-RP
Ordering Information
Storage
Drive bays 12 x 3.5-inch SATA 6 Gbps
Drive compatibility 3.5-inch bays:
• 3.5-inch SATA hard disk drives
• 2.5-inch SATA hard disk drives
• 2.5-inch SATA solid-state drives
Hot-swapping Supported
External I/O Ports & Expansion Slots
USB ports 1 x USB 3.1 Gen 2 Type-C
Interface
Buttons • Power
Important
QNAP recommends waiting at least two seconds after
powering off the JBOD enclosure before powering it on
again.
• Fan
• Audio alert
Dimensions
TL-R1200C-RP User Guide
Product Overview 4
To Next Page
Loading...
