Component TL-R1200C-RP
Form factor 2U Rackmount
Dimensions (H x W x D) 88.6 x 482 x 562.5 mm
(3.49 x 18.98 x 22.15 in)
Net weight 11.03 kg (24.32 lbs)
Others
Rail compatibility RAIL-B02
Note
• Rail kits are not included with the JBOD enclosure
and must be purchased separately. For details,
contact an authorized reseller or go to http://
shop.qnap.com.
• Information on rail kit installation can be found in the
installation guide included in the rail kit package.
Power supply unit TL-R1200C-RP: 2 x 250W, 100 - 240V AC, 50/60 Hz
Warning
To reduce the risk of fire or electric shock, ensure that
you only connect the power cord to a properly grounded
electrical outlet.
System battery CR2032 lithium battery (3V, 225 mAh)
Warning
To avoid potential battery explosion, causing injury or
damage to components, ensure that you replace the
existing battery with a battery of the same type.
Important
Dispose of used batteries according to local regulations
or the instructions of the battery manufacturer.
Sound level 33.4 db(A)
Note
The sound level was tested at a bystander position,
which is within one meter of the JBOD enclosure. The
test JBOD enclosure operated at low speed with the
maximum number of drives installed.
Fans System: 2 x 7 cm, 12V DC smart fans
Warning
To avoid potential injury or damage to components, do
not touch the fans while the JBOD enclosure is
connected to a power source.
Operating temperature 0˚C to 40˚C (32˚F to 104˚F)
Relative humidity • Non-condensing relative humidity: 5% to 95%
• Wet-bulb temperature: 27˚C (80.6˚F)
TL-R1200C-RP User Guide
Product Overview 5